News from GRL Engineers

Filter by:

Search:

Excavated Hole Irregularities Detected with Drilled Shaft QA Testing

Pile Dynamics, Inc. launched the latest drilled shaft testing device, SHAPE. This quality assurance evaluator takes 360 readings of excavated holes at a rate of one scan per second...

Details and Benefits of a Design-Phase Pile Test Program

Pile Buck International features GRL Engineers in this article about a design-phase pile test program.

GRL Engineers Announce A New Branch Manager

Deep Foundations Magazine features the newest additions to the GRL Engineers team. Tom Hyatt, P.E....

Drilled Shaft Quality Assurance from Pile Dynamics

As featured on Piling Canada, Pile Dynamics conveys the pertinence of drilled shaft quality in deep foundations.

Use of PDA-DLT Software on Drilled Shafts

Drilled shaft tests using the Pile Dynamics Analyzer - Dynamic Load Tester article featured in Pile Buck Magazine.

Intensive Design-Phase Pile Test Program for the I-480 Valley View Bridge Project

The I-480 Valley View Bridge project near Cleveland, Ohio involved the construction of a third bridge structure between two existing structures. The design-build team of Walsh Construction and CH2M (now Jacobs) developed the pile load test program and contracted GRL to perform the testing and analysis.

QA Testing for Drilled Shafts Featuring PDI

Piling Canada features PDI in their Industry News section, focusing on the benefits of using QA testing devices in drilled shafts.

Details and Benefits of a Design-Phase Pile Test Program

Pile Buck International features article written by Ben White, P.E., at GRL Engineers, Inc.

Pile Dynamics Offers 3-Day Webinar in December of 2019

Pile Dynamics, Inc. (PDI), will present a three-day webinar on Integrity Testing of Concrete Foundations by Low Strain Dynamic Testing (PIT), Cross Hole Sonic Logging (CSL) and Basic Principles of Thermal Integrity Profiling (TIP).

Foundations: Strength in Depth

As skyscrapers reach higher and become heavier, so pilings must be inserted deeper into the ground, resulting in a greater margin for error. Irregularities in the drilled shafts or deviation from the required angle, will mean less support for the structure above.

Advancing Thermal Profiling Tests with Smart Testing Device

The Thermal Wire® cables work with TAP Edge to collect data. This data is then sent from TAP Edge boxes to a TAG unit, sending the data via a cellular modem to the Cloud.

High-capacity driven-pile Foundation for a 33-story high-rise in Milwaukee, Wisconsin, USA

Nominated for the Top Project Award, GRL Engineers, Inc., has been recognized for the contributions made during the construction of the 7Seventy7 apartments in Milwaukee, WI. The project consists of a 33-story building in Milwaukee, Wisconsin, USA, with two levels of below-grade parking across the entire building footprint.

< 1 … 5 6 7 8 9 … 23 >

GRL News

Newsletter